Open questions RSS

Here you can see questions asked by other users. If you answer these question, your answers may be inserted into the FAQ.

Date / User Question  
2004-12-15 16:43
MoBO
FREESCO 0.3.x:
Hi, Before starting, I\'m using Freesco 0.3.3 and PPPoE connection. I have few questions (almost all related to file sharing). I\'m owned at SAT receiver with some linux os and tools. I like to stream/record channels to another place over the network. I have 2 solutions for this ; NFS or CIFS. In order to reduce amount of workstation running, I\'like to make my freesco as file server too. Do you know witch solution is the best one (faster and reliable) ? then... I wonder if Freesco can do NFS sharing ? I guess CIFS sharing will be done thru the samba client/server option. Is this true ? If I setup one or both options (if possible), do the Freesco performance will be impacted ? Thanks in advance for you help. Sorry for my english, I\'m... use to French :o) Keep in touch, Mauro
Answer
2005-03-18 12:04
Vishal Pal
FREESCO 0.3.x:
i want to run a freesco to share my internet as well as mail. i want to run my mail server which will recieve mail from my ISP Server of all users and my local users will get there mail from freesco. SMTP also i have with my ISP and i want the freesco to collect all mail from local user and send it. i have Good configuration system with high memory and hard disk space. is that possible to also make freesco as mail server. pls help me
Answer
2005-03-20 19:39
Ron
FREESCO 0.3.x:
Is there a driver for using a MOBO resident LAN adapter (Intel Pro/100)?
Answer
2005-03-27 11:07
Sean
Clients:
How do I view the clients that are currently connected to my FREESCO router?
Answer
2005-03-30 12:01
jacek
FREESCO 0.3.x:
Czy za pomoc± freesco moїna modyfikowaж warto¶ж TTL wysyіanych pakietуw (zamaskowaж zmniejszanie ttl o 1 przy maskaradzie)?
Answer
2005-04-07 00:10
Jacek
FREESCO 0.3.x:
Miaіem problem ze statystykami mrtg i wyczytaіem, їe przyczyn± moїe byж brak awk lub gwak, zainstalowaіem wiкc paczkк bash ze strony uk.freescosoft.net w wyniku tego serwer przestaі przetwarzaж skrypty cgi moїe kto¶ wie jak to naprawiж?
Answer
2005-04-07 08:54
Arnoldo
Generic:
Can i assign many (8) static Ip and nat on internal IP
Answer
2005-04-10 21:32
Nick Proto
FREESCO 0.3.x:
I want to connect a home network to Internet through a wireless network using pptp vpn. The networks are as following home freesco dual eth wireless ---------- --------------------- ---------- 172.16.0.0 172.16.0.1 10.122.0.1 10.122.0.0 Windows VPN server ------------------ 10.105.0.1 What is the configuration I should apply to the freesco router version 3.4? Thank you in advance. Nick Proto
Answer
2005-04-15 01:58
Simon Greaves
FREESCO 0.2.7:
Are there any known issues with FreeSCO 0.2.7 and CIDR? We have some AXIS web cameras which appear to have this software in them and we have problems where network connections get dropped if the camera is on a CIDR address (typically a /29).
Answer
2005-04-15 22:31
Richard Davis
FREESCO 0.3.x:
Does anyone have an image that I can use on a compact flash? I would like to run a small board computer with a compact flash boot. Thanks
Answer
2005-05-03 20:45
State
FREESCO 0.2.7:
How can I build two networks on different network cards for PCI ?
Answer
2005-05-05 13:20
Владимир
FREESCO 0.3.x:
Как можно указать модулю дополнительные параметры. Например для Granch принудительно поставить нужную скорость.
Answer
2005-05-16 13:37
Henrik Wiktorsson
Firewall:
How do I configure my freesco router to allow a windows-machine on my private network to establish a vpn-tunnel to outside vnp-servers?
Answer
2005-05-19 00:25
Robert Rielly
FREESCO 0.3.x:
Does Freesco support 802.11b/g ? and the obvious associated wireless nic cards ? Thanks, Robert
Answer
2005-06-05 10:24
Ton_vanN
Printing:
Gebruik versie 027 als router/server. Heb 2 printerpoorten in de machine die Freesco draait, die netjes worden herkend. LP1 al langere tijd in gebruik zonder problemen ingesteld met IP=515. De Clients (Windows XP machines) gebruiken AXIS-poorten voor hun netwerkprintopdrachten, die dus een verwijzings layout hebben van LPT3@192.168.x.x o.i.d. Nu pogingen om LP2 op de printerserver in gebruik te nemen t.b.v. een 2e netwerkprinter: via Freesco setup is LP2 in de printerserver geactiveerd met IP=525. Bij de AXIS-poort instellingen voor de printer in Windows XP zie ik echter niet hoe ik verschil kan maken in de 2 printerpoorten, en proefondervindelijk merk ik dat alles naar LP1 van de printerserver gaat. Hoe adresseer ik nu vanuit een client met Windows XP het gebruik van die LP2? Is AXIS PM Setup wel het goede tool voor deze toepassing?
Answer
2005-06-09 18:13
podpora
FTP:
I got this FREESCO One-Floppy thing and now I am wondering - can I get a one-floppy stand alone FTP server, without any routers, HTTP servers etc. So, my wishes are. - FTP Setup floppy (1.44 Mb) - This FTP Server shuld be based on any Linux / Unix distribution - Server shuld be supporting TCP/IP - Server shuld be based on stand alone system (Like FREESCO Router)
Answer
2005-06-13 09:06
Mathias Tabo
Printing:
Como puedo hacer para utilizar una impresora USB con el servicio de Printserver? How to put to work a USB printer in the printserver module?
Answer
2005-06-18 14:12
Andrew Stasyuk
Clients:
How to configure pptp client to connect to Windows VPN server???
Answer
2005-06-22 06:47
Anatoli
FREESCO 0.3.x:
I have installed FD with Freesco 0.3.4. I want to add RTL8139 driver, BUT FD is FULL yet. How I can decide this?
Answer
2005-06-30 14:14
christian Winkel
Packages:
i have instaled some packages, - netsaint - iptotal but after the instal you see a webpage but if i open explorer and type the http address i see noting but on my freesco box in every thing good i also instaled perl please help me
Answer
2005-06-30 19:07
pedro machado
FREESCO 0.3.x:
necesito utilizar una tarjeta inalambrica wmp54gv2 de linsys en mi enrutador freesco їQue debo hacer?, de ser necesario que otro sistema de enrutador pudiese usar, si es posible que sea de este tipo de un disquete.
Answer
2005-07-07 20:40
kiran rana
FREESCO 0.3.x:
is it possible i give a time priode to any site .such as i want to use yahoo massanger at 6:00pm to 8:00pm if it is possible pls tellme how i can do it i shell be highly thankful to u
Answer
2005-07-12 18:44
schlesi
FREESCO 0.2.7:
I do not see from any computer in my lan the other computers in the network!! what can i do?
Answer
2005-07-13 00:54
Jason
FREESCO 0.3.x:
There are some package that permit monitor freesco efficiency? Can I do a copy of freesco configuration, for recover freesco of a crash. Thanks
Answer
2005-07-13 04:51
Darren
FREESCO 0.3.x:
I was wondering if Freesco supports any wireless network cards? Is it possible to have four network interfaces in one Freesco router box? I wish to install a wireless access point on one, and have an adsl modem attached to another, with a third point attached to the main PC, and another for either a hub, or spare port for laptops / etc. ????? Your assistance is appreciated.
Answer
2005-07-17 19:00
sulle
FREESCO 0.3.x:
how to read the log??
Answer
2005-07-21 13:32
josep girbes
FREESCO 0.3.x:
Hi, I have read your answer about install network card, but I don\'t know to do, I have got two 3c905B PCI, but my bios don\'t permit change PnP options or assing other IRQ. And warning message appear: !!!No network card found at all, check your settings!!!. What can I do? Thanks. Bye.
Answer
2005-07-21 15:53
Slider
FREESCO 0.3.x:
I\'ve small remote local network, where freesco 0.3.4 installed as router. I need to connect to some mashines inside this network from outside across port 22. How should i tune my port forwarding, that all machines inside this LAN were accesible from WAN over port 22?
Answer
2005-07-21 16:00
Slider
FREESCO 0.3.x:
Всем здравствуйте. Народ, есть две части одной приватной сети 192.168.0.0 с маской 255.255.255.0 разнесенные в разные концы города. В каждой имеется ethernet-подключение к внешней сетке, в качестве маршрутизаторов используются две фриски. Соответственно, имеются два статических внешних IP-адреса. Реально ли объединить эти две части в одну штатными средствами фриски, одновременно используя их также для доступа в интернет участников соответствующих сеток?
Answer
2005-08-09 13:13
pgofman
FREESCO 0.3.x:
PROFTPD как добавить юзера - по анонимному заходит даже рута не пускает ???????????????????????????????
Answer
2005-08-10 20:47
Steve Provost
FREESCO 0.3.x:
Hi Is there any way to manually set the link for the network? What I am looking to do is set both of the network cards to 10baseT-FD. Right now they only link up at 10baseT-HD. Thanks Steve
Answer
2005-08-15 09:53
Ivelina
FREESCO 0.3.x:
Can I make Tunnel Interfaces with Freesco?
Answer
2005-08-22 20:41
kar
FREESCO 0.3.x:
How I can use serial (com1 or com2) printer (plotter).
Answer
2005-08-27 00:59
Vader
FREESCO 0.2.7:
Chce aby klient w mojej sieci o mac np: 00:00:00:00:00:00 mуgі korzystaж z netu tylko dla nr IP 192.168.xxx.xxx Nieinstalowaіem zadnych pakietуw itp. W katalogu bin/ znajduje sie plik arp wpisuje komende w konsoli arp -s 192.168.xxx.xxx 00:00:00:00:00:00 i wyskakuje mi invalid argument Co jest јle ??? w pomocy dla arp dodanie wpisu jest okreslone taka komenda arp -s IP Mac [temp][nopub] Co to jest to [temp][nopub] Za pomoc bede wdzieczny
Answer
2005-08-27 14:50
emcze
FREESCO 0.3.x:
Zainstalowaіem Freesco 0.34 na starym pentium (192.168.1.1), przez huba podі±czyіem dwa kompy. Jeden (192.168.1.2) widzi strony www i korzysta z gadu-gadu. Drugi (192.168.1.3) o dziwo, moїe korzystaж z GG, ale nie widzi їadnych stron www. Co wiкcej, w otoczeniu sieciowym ten pierwszy widzi wszystko, drugi - nic. Z tego drugiego ping dziaіa (!), nie jest to teї kwestia DNS, bo adresy wpisywane cyferkami teї siк nie otwieraj±. Jakie¶ pomysіy?
Answer
2005-08-29 13:15
Georgi Minev
FREESCO 0.3.x:
My Freesco router 0.3.x time to time stop working. How I can fix this problem?
Answer
2005-08-31 22:45
PeterW
FREESCO 0.3.x:
Specjal low-memory instalation procedure???? I have only 4 MB of RAM, but have a HB 300 MB, Can you help me?
Answer
2005-09-03 05:16
yadi
FREESCO 0.3.x:
Dear all can i set fressco router to be my diap up server
Answer
2005-09-04 13:40
sharath
FREESCO 0.3.x:
Hi, I don\'t know where to start FREESCO from. I have downloaded both freesco-034.zip and modules-034.zip from Sourceforge. Now how shall I start. What do I require to start with. I have a system with Linux running on it. Please guide so that i can run Freesco and appreciate the same. Thanks, Sharath
Answer
2005-09-05 19:03
martin
Networking:
Hi I just installed a freesco copy but I can\'t make it to use the network. When I try to ping my Windows machine I see in Ethereal only arp requests, nothing else. When windows trys to ping freesco - the same thing. I disabled the Freesco firewall - default polycy for INPUT chain - ACCEPT. I think that my Freesco jokes me and it do not wants to send anything else than ARP requests and responses help please
Answer
2005-09-06 18:44
henry
FREESCO 0.3.x:
Is It possible to set up FREESCO to recognise BT VOYAGER 2010 USB and a nix to make a wireless to lan router with firewall and NAT? I\'m not very goof at progamming. I normally use WINDOZE 98se but its just too unreliable. I\'ve lost 3 systems to virus/hacks/ or other unexplained system failures, and I\'m getting a bit miffed. I\'ve tried knoppix and scoured info sites but can\'t find out how to get the BT Voyager to work on linux. Any help/tips/web pages/info anyone\' please?
Answer
2005-09-08 23:35
Roland Nygren
FREESCO 0.3.x:
I have configured eth0 to ask for DHCP information. When booting this fails. executing ifconfig shows 10MBPS but I beleive the broaband router is running 100MBPS. How do I configure eth0 for 100 ?
Answer
2005-09-23 16:26
Adam
FREESCO 0.3.x:
basically, ive got it onto a floppy disk, im trying to run it Win Xp, but it says \"go to control panel and install and configure system components\" when ever i go to command prompt (cmd) and type setup, some help please? what do i do? thanks adam jones
Answer
2005-09-26 12:18
Bogdan
FREESCO 0.3.x:
i have a modem wich i can connect to my computer in 2 ways: - an installed lan card on my computer - usb port i want to use the freesco disk for routin internet to my network pls can U tell me how can i do this using freesco disk
Answer
2005-09-26 22:09
Hein Spijker
FREESCO 0.3.x:
Hoe stel ik de juiste tijd in met freesco?
Answer
2005-10-01 17:42
Jay
Generic:
What kind of lease-line serial wan cards does FREESCO support? I\'d like to find an option to those expensive Cisco routers. Thanks, Jay
Answer
2005-10-02 07:58
Yadi
FREESCO 0.3.x:
Im new in freesco, how do i setup my modem on freesco to be dialin modem ( So i can connect/using internet via dialup to my freesco modem ) Regards Yadi
Answer
2005-10-02 15:56
B M Janko
FREESCO 0.3.x:
How do you define fall-back connection, say eth1 (ext) goes down i want to use ppp0 for internet instead?
Answer
2005-10-03 10:59
Englebert
FREESCO 0.3.x:
Hi. Englebert here. I would like know whether can the FREESCO configure TWO WAN port as a load balancing or sort of fail over to another WAN port whenever the other WAN line is down?
Answer
2005-10-12 17:40
brian
FREESCO 0.3.x:
How do I add the \'ethernet.gz\' eepro100.gz to the floppy. I copied the .gz to router/drv but that does not seem right ???? On boot up I get no ethernet card found I
Answer
2005-10-15 20:55
Adam Saleem
FREESCO 0.3.x:
I have a cable modem and static ip,can i use FREESCO to share my internet connection?If so Pls tell me how coz i\'ve tried a lot
Answer
2005-10-20 11:18
karthik
FREESCO 0.3.x:
Does this supports IPV6 and DHCPV6? if additional pacakges need to add let me know which to use?
Answer
2005-10-20 14:46
Manny
FREESCO 0.3.x:
Hi there, Here\'s my problem with Freesco 0.3.4 Everything works fine except it won\'t let me login via SSH. I am trying to connect via Putty from a Windows machine or via SSH client from other linux boxes. It gets as far as asking for username, I type in \"root\" and then it seems not to accept my password, even though I know it is correct because I can login from the console with the same password and it works... Any thoughts? Also, I am trying to install MRTG on this too but I can\'t get snmpd to work. During install I get an error with libsnmp.so.3.7 and then when I run rc_snmpd start it says it starts but it doesn\'t run. Any thoughts? Thanks
Answer
2005-10-21 05:12
Anthony D. Carreon
FREESCO 0.3.x:
Hi All, Where can I get a copy of SAMBA pkg for Freesco. I have enabled the FTP service of my Freesco Box and I want to get the files that are uploaded via my LAN on Windows Client. Best regards, Anthony
Answer
2005-10-25 06:55
gatot
FREESCO 0.3.x:
i\'m setting Up IP Aliasing On A FREESCO Machine v0.3x and i Place the commands in your /rc/rc_user script: start) #setting up IP alias interfaces echo \"Setting 172.16.3.10, 172.16.3.100 IP Aliases ...\" ifconfig eth0:0 172.16.3.10 ifconfig eth0:1 172.16.3.100 #setting up the routes echo \"Setting IP routes ...\" route add -host 172.16.3.10 eth0:0 route add -host 172.16.3.100 eth0:1 ;; after that my machine hang and can\'t reboot pls aswer my ask
Answer
2005-10-26 13:15
ivan
FREESCO 0.3.x:
How to count TCP traffic as INBOUND and OUTBOUND in Freesco 0.3.4 ?
Answer
2005-10-28 20:37
Ron Sodos
FREESCO 0.3.x:
I am wanting to only allow a particular IP address access. What commands do I add into NAT
Answer
2005-11-07 07:50
Mike
FREESCO 0.3.x:
Does Freesco have support for a DMZ? And if so, how to I access/use/setup one up? Thanks! -Mike
Answer
2005-11-09 07:09
Ubirajara Bandeira Jr
Generic:
How can I see all the commands available in FREESCO? Can I execute a .EXE or a .COM file (like restart, edit, fdisk... from MS-DOS)?
Answer
2005-11-09 22:31
Lou
FREESCO 0.3.x:
Our ethernet interfaces (3) appear to be active and have addresses assigned yet we can only ping them when they are on the same \"network\" address (192.168.1.xxx). Pinging has been enabled and all IPFWADM deny rules have been dropped. Is there anything else we could have missed?
Answer
2005-11-14 04:56
steve
FREESCO 0.3.x:
How can i make a router out of a old computer using a dialup modem (cant get adsl where i am) regars Steve
Answer
2005-11-15 17:40
marco antonio mendieta
FREESCO 0.3.x:
hola amigos espero puedan resolver esta pregunta lo mas antes posible. perdi la contraseсa para entrar al ip publico de freesco, que puedo hacer por favor
Answer
2005-11-18 13:59
Leonid
FREESCO 0.3.x:
I have USB ADSL modem D-Link DSL-200. Does freesco support it?
Answer
2005-12-01 02:57
Haris
FREESCO 0.3.x:
Can I limit the bandwidth for my client with Freesco? How?
Answer
2005-12-14 19:49
Allen
FREESCO 0.3.x:
How do I configure restrict.cfg? Sub-questions: What is default behavior - allow all? What takes priority? (ie. do I ban first or allow first?) If I ban the subnet and then allow specific machines, do I need to include the router's IP (eg. eth1) Mask 255.255.255.0 is the same as /24? Both for bl AND be? (How) Can I ban a client access to specific IP's? (eg. stop 192.168.0.16 from accessing 111.222.111.222?)
Answer
2005-12-21 20:01
Grzegorz
:
dla freesco byіa paczka klienta ftp i dziala poprawnie. Jak zaladowac takiego klienta dla 032 ?
Answer
2005-12-23 21:24
Chris
Tips and Tricks:
I was wondering If I could get some Help on how I could best use FREESCO with what I have. It will be my First Time using any kind of linux based stuff. I currently have 3 Pc's networked all on XP, but unfortunately they are hooked in to a NB1300 plus 4 Router. This router only allows 20 ports to be forwarded and you cant forward the same port to more than one lan ip, this and a variety of other problems with this router is one of the things that drew me to FREESCO, that and I want to web serve at some point and would like to be able to access files externaly or create FTP accounts for friends. I really cant afford any more hardware and thought this might be an option, I have had a long look through the forums but am not sure if I can proced with what equipment I have. Any help would be greatly appreciated. Merry Christmas, & A Happy New Year To you all
Answer
2005-12-25 19:43
chaosgame
Clients:
How do I configure my Mac OS-X computer with FREESCO?
Answer
2005-12-28 05:46
Tedy
Networking:
hi, i used a freesco 0.3.x as my LAN router. my net config: eth0 as internet conncetion gateway, eth1 connected to switch hub (LAN). I'm planning to build another LAN and connect to my freesco router. how i setup networking config if i want the new LAN conecting to internet? and is there any bandwidth management for freesco 0.3.x? thank u
Answer
2006-01-01 13:45
alisou
FREESCO 0.3.x:
Comment rendre visible un serveur web sur un pc local via un freesco router?
Answer
2006-01-01 13:48
alisou
FREESCO 0.3.x:
Comment rendre visible un serveur web sur un pc local via un freesco router?
Answer
2006-01-10 06:52
Alex
:
May i mount /www and /ftp to another partitions, for example: /dev/hdb1 and /dev/hda2 during bootstrapping? What i must edit in the RC -files?
Answer
2006-01-16 23:04
lionel valero
FREESCO 0.3.x:
Hello, Is pptp-client supported ? Regards.
Answer
2006-01-27 02:04
dave johnson
FREESCO 0.3.x:
Any ideas how I might get Freesco to relay dhcp requests to a different dhcp server?
Answer
2006-02-02 04:18
Jatmiko
FREESCO 0.3.x:
How to limit the bandwidth for my client using freesco?
Answer
2006-02-08 09:37
Gromozeka
:
Как добавить на интерфейс второй IP адрес
Answer
2006-02-10 17:05
Joe Grzybowski
FREESCO 0.3.x:
I have vmware installed on my Dell laptop, and want to run multiple freesco machines in order to play with router configuration. The problem is that I do not have a floppy drive available. Can I install from cdrom? How can I install freesco without a floppy being available?
Answer
2006-02-21 20:16
Andrew
Packages:
Does PostgreSQL work well will Freesco?
Answer
2006-02-23 22:31
Serge
FREESCO 0.3.x:
I neew to create usual two-way router, without masqarading, firewalling etc, with first interface connected to ISP (internet subnet), second - to company's firewall (internet subnet with addresses assigned to company). After switching off masquarading, and even changing default INbound policy (accept), I still cannot achieve this goal - internal interface seems to be firewalled, clients from second network can ping it, but it is impossible to ping clients in second network from FreeSco machine...
Answer
2006-02-26 10:25
StaRsas
FREESCO 0.3.x:
How to know is pppoe established?
Answer
2006-03-07 02:29
Ryan
FREESCO 0.3.x:
I just installed Freesco 034 but I can't log in to the command line. I've tried root, root and admin, admin but no luck. Suggestions?
Answer
2006-03-07 12:06
Andreas Roed
:
Hej Freesco Jeg har en Dell optiflex gx240 som jeg har et onboard netkort og et i en pci extender. men den kan kun finde det ene netkort som sidder i extenderen og det er det som inet lшber ind pе. da jeg sе satte et mere i i samme extender kunne den stadig kun finde det samme som fшr. Er det drivere jeg mangler eller noget? Er det noget i kan afhjжlpe eller forklare hvorfor? /Andreas
Answer
2006-03-16 17:04
Slaider
:
Сразу хочу извиниться перед тми, которые посчитают эту тему не нужной на этом форуме и отправят меня на официальный.... Я все-таки попробую ее тут поднять так как не смог разобраться на официальных форумах и факах. Суть пробдеиы - моя фриска не видит сетевых карт, вообще не видит. Realtek RTL8139Family PCI видит ихние IRQ (10 и 11). Возможно я то-то напутал или недопонял... обьясните плз как поднять сеть, так как мне кажется что она просто не поднята... Если нужно что-то конкретизировать пишите - добавлю. А... - сети: 1) 192.168.0.xxx 2) 10.2.113.xx первая локальная, вторая - через нее нужно некоторым компам ходит в интернет и почту...
Answer
2006-03-19 17:05
plamen
FREESCO 0.3.x:
Howto change to root from other user in the same console? The root is disabled from outside and I do not now the kommand howto become root (like su or sudo in other Linux.
Answer
2006-04-01 07:59
kholil
FREESCO 0.3.x:
i just install freesco 3.2 and i try NAT and DHCP system an then all is work.but i have a problem with message always appear in display like this " /etc/dhcpd.leases : no such file or directory " what it means..and how to stopping this message.
Answer
2006-04-07 05:03
mike
Packages:
Cannot find links identified in;- FTP How can I use an FTP server behind my FREESCO firewall? The FTP protocol doesn\'t work very well through a NAT/firewall box, because a \'random\' port is selected for communication between client and server. A possible solution for this problem is to install the proxy-suite package. See Dingetje\'s packages page. This white paper describes the proxy-suite in detail. A sample config for FREESCO 027 shows howto expose an FTP server running inside the firewall at IP 192.168.0.21.
Answer
2006-04-08 20:24
Hugues
FREESCO 0.3.x:
Is it possible to remote upgrade from version 0.3.3 to 0.3.5 (through ssh on Freesco installed on hd)?
Answer
2006-07-17 15:12
Николай
:
Подскажите, как установить FeeSCO на SCSI диск с контроллером Tekram 390U
Answer
2006-08-28 17:03
m b unal
Printing:
how many printers can i connect to freesco ?
Answer
2006-09-12 12:23
nnaemeka david (emekadavid)
FREESCO 0.3.x:
i want to work with freesco in the office as a router and am wondering if i can install it on suse 9.2? i wouldn't want to have a separate router from my workstation, it would make me work while watching the network stats without switching between monitors. is this possible. am new to linux.
Answer
2006-09-29 19:45
Ton vanN
Generic:
Is it possible to link a mailserver to Freesco? In other words, can mailserver software be fitted to the PC which is running the Freesco software 027 or 03x, making it possible that the users of my LAN can get mutual mail exchange as soon as that PC comes online?
Answer
2006-11-22 21:21
Martin Andreassen
FREESCO 0.3.x:
I'm thinking of installing and using FREESCO. But there are a couple of questions i'd like the answer to before i begin; Firstly, can FREESCO connect to a wired lan with 802.1x autentification, and then let my other computers connect through the FREESCO-box without the need for autenticating. The second question is if it's possible for me to have one computer to connect wirelessly throug the FREESCO-box?
Answer
2006-11-29 21:55
Hugo
Generic:
Hi... Can i install freesco on a wrap board?. thanks for your answer
Answer
2007-01-19 17:13
john
FREESCO 0.3.x:
can freesco be put on a zip drive and run from that?
Answer
2007-01-31 17:12
Ken Calisle
FREESCO 0.3.x:
particularly the instructions about the ethernet cards. I want to know the general infomation on that. thanks
Answer
2007-03-26 14:42
Dj-Firewall
FREESCO 0.3.x:
hi there I want to run vb.net, asp.net n sql on a freesco web server. which packages should I get for it? will wait for ur mail keep up da good wrk dude cheers
Answer
2007-04-18 10:38
Slava
:
Пытаюсь настроить роутер выделенки - leased line router все хорошо: модем обнаруживает, сетевушку и т.д. , но при загрузке, собственно pppd выдает "serial line is looped back" при этом модем подмаргивает лампочками и на выделенку не инициализируется команды иниц. выделенки забиты в строке инициализации модема
Answer
2007-05-11 00:01
George
FREESCO 0.3.x:
is there a 10/100/1000 NIC that will work with 0.3.x version or am i just chasing my tail. i've looked everywhere for compatibility
Answer
2007-05-18 14:34
Den Kushel
FREESCO 0.3.x:
Where I can find inittab file on freesco?
Answer
2007-07-06 21:20
Adaptive Silicon
FREESCO 0.3.x:
Since Moving to FREESCO 0.3.7 i have not been able to use snarf for anything... even earlier versions of snarf... i dont' get it... i can DL the same file from a PC behind FREESCO but not from THE FREESCO BOX surely they are using the same ports... is there some QUIRK that has suddenly changed? WHY Change it? and How the HELL do you actually make use of it?? sure i could install wget and would probably work. or any other kind of complex Larger than necessary method.. but why when snarf was nice and small and came with FREESCO? simple i want to be able to "snarf http://www.address.com/dir/file.ext " perhaps with a changing date etc so files dont' collide if i have them in cron. atm i can't even snarf anything! and i have no errors or feedback from FREESCO... i dont' know where to look cause nothing is sending Flags !!!! the most i get is Connection timed out... Debug says connection went out and site replied but snarf does nothing! sorry for the long explanation but if you can help Please fire me back a reply? Kindest of Regards and Thanks in advance for any help you can be, Adaptive Silicon.
Answer
2007-07-10 22:12
Brian
FREESCO 0.3.x:
Is there an ext2-0.3.7 pkg available? I want to install 0.3.7 to HDD .... Thanks in advance
Answer
2007-09-28 07:48
anthony
FREESCO 0.3.x:
How can I ban IP/MAC of my clients for a particular period. ex: 192.168.x.x from time HH:MM To HH:MM I want to limit their usage of the internet beyond the normal working hours.
Answer
2007-10-09 16:33
bradipo72
FREESCO 0.3.x:
Freesco or a freesco module support routing protocol like rip, igrp or eigrp?
Answer
2007-11-29 12:14
etsoft
FREESCO 0.3.x:
is there any support for wireless nic cards? Thx in advance.
Answer
2007-12-05 17:30
abid
FREESCO 0.3.x:
How to configure dsl modem (broadband) that came with only network socket at the back?
Answer
2007-12-28 13:33
Rod Lee
FREESCO 0.3.x:
Can I setup static NATs? i.e 192.168.10.2 = 10.10.10.1
Answer
2008-02-16 11:34
Steve
FREESCO 0.3.x:
I'm running Freesco 3.5 but would like to upgrade to the latest version. Is there an upgrade method or do I have to do a completely fresh configuration? Thanks in advance Steve
Answer
2008-02-21 23:56
namidjah
FREESCO 0.3.x:
Hi, I have installed openfiler on my relative old computer and use this as a NAS/SAN appliance. Now I want to use the same computer to act as a router of my 2 segment lan (fast- and giga network). Can I use FREESCO for this purpose ? It looks like FREESCO will install a complete Linux OS on the computer. I want to preserve my openfiler installtion and just want to add FREESCO to be used as router. Thanks in advance for the information. Best Regards, Namidjah
Answer
2008-03-05 09:55
DB
FREESCO 0.3.x:
Is their an idiots guide for installing/configuring freesco as a simple router ( no firewall ) with support for forwarding dhcp request packets ? Plan to use freesco in a virtual env for domain simulation etc.
Answer
2008-03-31 23:13
Muryk124
Networking:
I have a linksys router that has access to my ISP. I've a freesco box just behind it, with two network card, one that receive an IP from the linksys the other that assign ip on client computer. Those client computer cannot access to the net, why ?? isp linksys freesco client eth0 192.168.1.104 (assign by the linksys) eth1 192.168.2.1 client 192.168.2.10 (assign by the freesco dhcp on eth1)
Answer
2008-06-03 16:49
Peter Stams
Generic:
Can FreeSco replace my speedtouch 780 WL (KPN) which claims it can handle my external IP range. Can FreeSco do that for me? I want the following setup. 1 Hardware server hosting multiple vmware servers. 3 vmware servers host a website (port 80 et others). I want ip1 to connect to vmserver1 over port 80. then ip2 to connect to vmserver2 over port 80. This is something my speedtouch can't do or I am to stupid to be able too with that piece of s.. hardware.
Answer
2008-06-05 15:49
Jim
FREESCO 0.3.x:
I installed Freesco 3.8 using the Setting up FREESCO for dummies. It went very well but the installation is for putting the product on a hard drive. That wasn't a problem either. I found a reference to 'backup'. When I use the command 'backup' I get the warning about copying standard system configuration files . Hit yes, see copying files. Then in Green !! The disk is unmounted !! "Warning: Some errors occured during backup. Please check your disk". Can someone please explain in layman's terms how to create a backup on a floppy disk. For now I just installed the product again using the floppy and confirmed it boots up with the correct configuration. But I can't access the Http: server when I use the floppy. I love this product but find answers to simple things like this is a time killer. Thanks for any help you can offer.
Answer
2008-07-07 19:05
Antonio Costa
FREESCO 0.3.x:
I cant use Freesco with the latest VMWare 2 (build 101586). All my old VMs with Freesco were not working and i tried to create a new VM but nothing. I was using just for lab support starting with no HDisk and only one floppy. Any tips?
Answer
2008-07-10 04:16
Gareth Gibbins
FREESCO 0.3.x:
I am trying to setup a link between a mates lan and mine, we both currently have adsl connections (that we want to keep) and thus both have gateways, I am trying to use freesco boxes that will be the routers allowing a wireless connection on one nic (the bridge between us) a wired connection to the local lan at each end and our current adsl routers (modems really) on a third, I have posted a very basic picture at http://www.heywoodsc.vic.edu.au/Giraffe's/ we currently have picture1, I am trying to achieve picture2 or if thats not possible maybe I need to do picture3. I am sorry to waste your time on just me, but I have tried for a week using smoothwall (no success at all) and freesco, I like the "dos"y look of freesco (part of being an old fart I think:)). I can get from the bridge nic into the local lan and I can get from the bridge or local lan out to the internet, but I cannot get from the local lan into the bridge. For example, if I replace freesco2 with a pc (using only 1 nic, ie no other networking there) it gets an ip from freesco1 and can get into local lan 1, BUT local lan 1 cannot get back into it (by \\192.168.131.x where x is the ip of the windows box replacing freesco2). I have told freesco that network1 (local lan1) and network2 (wireless bridge) are trusted. All nics are intel, and seem o.k. as I can get from either lan out to the internet, and I can get from either end of the bridge to the internet too, the wireless bridge does work, although at the moment I am just using a cable between the freesco's to prove it. Any help would be greatly appreciated, I am sure your product can do this for me and have no doubt I am missing something simple, I just cannot work out what it is. Thanks, G.
Answer
2008-09-29 10:48
How Freesco\'s \"grep\" works ?
Generic:
I understand that "grep" tool in Freesco distribution has a limited functionality, however the question is: does it support a pattern for ANY string, I mean '.*' pattern ? It would be very useful to have such possibility. As I checked, grep supports '^' '$' and '.', but '.*' seems not working. Where can I find the official specification how Freesco's "grep" works and which meta-characters it supports ?
Answer
2008-09-29 18:37
BJaguar
:
I Downloaded ZipSlack 10.1 Running on VMWare return kernel panic no init try use /init= for kernel What should I do in that case? Thanks in advance.
Answer
2008-10-30 18:49
K.Elders
FREESCO 0.3.x:
Dear Sirs, How do I know what kind of download I want... I want an anti-virus and firewall for Linux (for free if possible). Respectfully, K.Elders
Answer
2008-11-25 23:42
Jeff
FREESCO 0.3.x:
Is there an ip-helper type command in FREESCO? need to forward DHCP requests from one vLan to another with DHCP server on it. I curerntly do this on my cisco router and want to do this virtually. Thanks
Answer
2009-01-04 06:43
Pavel Splechta
FREESCO 0.3.x:
Can you install freesco on CF card?
Answer
2009-06-13 14:12
James Heath
Generic:
Does Freesco provide the ability to configure a PC to be a router on a stick?
Answer
2009-08-02 20:40
Alexey
Generic:
My Internet provider requiers to use the L2TP/IPSec protocol to access to the WAN. Is it possible to enhance the FREESCO with any L2TP client (for exammple, OpenL2TP)? Thank you in advance, Alexey.
Answer
2009-12-16 22:39
John
Generic:
My ADSL router only supports routing or Full bridge. No half bridge mode.. In New Zealand almost all ISP's only provide PPPoA connections. Can Freesco handel the PPPoA connection to the ISP. Rgds ..John
Answer
2009-12-19 00:43
Anthony
FREESCO 0.3.x:
Hi I've been trying to install Freesco 0.42 on a Pentium 3 with both a hard drive already installed with MS-DOS,and a blank formatted one(tried both).The Bootable CD I created (because it wont boot from floppy) works fine.It loads to the start-up screen,then when I select move2hdd,which is what I want to do (have it permanently residing on the small HD) it lets me enter "root" but the password will not show up on the screen and it shows an error (with a drive).I would have thought that someone brought out a CD version that works but cant find one (only mine)Im not familiar with Linux syntax,so I could be entering something wrong.Linux newbie I suppose,Any tips welcome.Thanks.
Answer
2010-03-02 23:46
Peter Daalder
FREESCO 0.3.x:
Hi Each try so far with running freesco in a VM fails to boot. What I get, below of couple of steps it goes through - welcome screen (with options: setup, debug, etc) - Loading Ramdisk - Loading kernel - Loading modules - mounting device - Thanks Lewis Baugham And then it get stuck, display what I call a blue screen in windows, but it is black. There is all kind of values: EIP: xxx EFLAGS: xxx .. .. Stack: xxx Call Trace: xxx Code: xxx Any tip what I can do? Peter
Answer
2010-05-11 08:23
David Gomez
FREESCO 0.3.x:
can i configure 5 or more wan to balance?
Answer
2011-01-29 17:22
Jay
FREESCO 0.3.x:
Can i use fresco for a multiwan router? Any howto?
Answer
2014-06-10 12:59
UKQuirkygeek
Networking:
Hi, I want to use Freesco as a 'router-on-a-stick' to route between my VLANS. Does the product have this capability, I beleive I need sub interfaces) Thanks, Gareth
Answer
2014-11-17 14:02
Martin
FREESCO 0.4.x:
Is there a feature to mirror ports on within this product. I want to use it for testing purposes in VMware. How can I achieve this?
Answer
2015-06-01 08:31
AgatheBauer
FREESCO 0.4.x:
Freesco refuses to install on the HD that I prepared (no usable harddrive/parition found). I'm using Vmware ESXI. I mounted the harddrive image to a Windows 7 virtual machine, created an active partition and formated with FAT (256MB). Why is this? I double checked from Windows, it's a primary and active FAT partition.
Answer
2016-03-17 22:24
Goncalo Rosa
FREESCO 0.4.x:
How can I install open-vm-tools on a freesco v0.4.3 Linux version 2.0.40 (gcc 2.7.2.3)?
Answer